1, to ensure the proper construction and installation of toilet, please try to use glass, plastic seal, such as cement mortar, the mortar should not exceed more than 3 to prevent excessive and stays due to stress crack toilet.
2, not within the ware into newsprint, paper, changing mat, easy to plug items such as sanitary napkins.
3, accidentally fall into the toilet inside the debris should be promptly removed. Blocked immediately with skin attract gas excluded.
4, apparatus or not so hard, rough fabric and ceramic contact can not be beat, hit.
5, attached to regularly clean the dirt with a detergent, cleaning can not afford, the brush cleared. To keep its surface clean. 6, can not be used and stored at temperatures below zero water environment.
7, computer bath room. The most important is to prevent leakage on its regularly check whether the circuit insulation.
8, bath house. Do not place unnecessary things. (Towels, silk, etc.).
9, in order to avoid harming bath and plumbing, do not use sulfur, acid bath essence or organic solvents.
stone shower tray products towel rack towel rack purchase of scientific knowledge as daily necessities, to buy the former should have some scientific knowledge is necessary.
First, do not be those that guide scientific promotions mistake: such as the current “space aluminum” phenomenon:
1, said to be using the same equipment and aerospace, “aluminum” material that is the so-called “space aluminum.” In fact, currently only used in sanitary aluminum alloy materials, and aerospace equipment used has a very different, just the price difference on many, many do, implying that the sanitary products are used can not afford, such as the use , simply can not be friends at this price, say aerospace equipment used in the “aluminum” material is controlled, and to processed materials, sanitary ware manufacturers of aluminum is very little known “space aluminum” material, there is no “space aluminum “This material grades.
2, the “space of aluminum,” said to never rust, it is business as a promotional tool, in terms of scientific knowledge is, in fact, it should be said to be common sense, the phenomenon of surface deterioration are: aluminum – - oxide, iron rust —, — copper patina, weathered stone —, — rotten wood, plastic — aging ,——。
Second, the selection of material types: sanitary towel products commonly used material is stainless steel, copper, and now there is also an aluminum (aluminum alloy), iron, zinc, plastic, various materials was divided into a lot of series, if necessary, in the “Practical Hardware manual “to find out. In contrast, the material in stainless steel and strength to be better.
Third, the surface stability: 1, depending on the material nature, 2, the surface processing. The following describes a few:
1, compared with the nature of stainless steel is not rust (rust is an oxidation process actually) features to ensure the most stable, so the most popular, “stainless steel” just to polish or brushed directly on the surface, no further change in the surface material, or an additional coating, but according to different grades, there are some differences in stability, known as the 304 day is better than 201. Surface polished, good material, good processing up to the mirror, but better than copper plating had to be worse.
2, “copper” basic categories of brass, and chrome plating surface, handled well, and can reach the mirror, plus the nature of copper prices, there will be noble feeling, if not the electroplating process, the surface very easy to raw Pseudomonas, can not be used, such a plating layer on the surface finish compared to the iron layer of “paint” much more robust, but also depends on plating process, or do not use their remaining years would patina of the surface. As commonly used in sanitary products “stainless steel” material is much lower than the price of copper, stainless steel and copper, according to some manufacturers share similar magnets can not afford to absorb the characteristics of the stainless steel plated after the fake is “copper” materials do it, although the stainless steel plating cost is not cheap, but overall are cheaper.
3, on the “aluminum” as “aluminum” steel intensity is not easily oxidized and surface requirements can not be used, using the generally anti-rust aluminum group or hard aluminum group, but not likely is the so-called aerospace equipment and materials like aluminum, “Al” materials through the surface oxidation of the surface oxygen pole than without surface treatment to stabilize many, there are a variety of surface processing of results, mainly two types: a surface looks to brighter, one is matte surface looks similar, although the thin surface layer of the former but some hard, not easy to scratch. The latter is like adding a layer of surface coating layer, although the thick but easy to scratch, after a surface can be processed into a variety of colors, aesthetics is better, it can be considered advantages.
4, “Iron”, due to the easy rust must be surface treatment, sub-chrome plating or paint, compared with “Iron” above the plating layer is no “copper” plating layer above the more reliable. Using painting process, paint is easily scratched, peeling off. However, there are a variety of colors so you can do something beautiful, the paint is not handled well life is short, such as automotive sheet metal paint, a good ten years is no big problem.
5 “plastic” in the steel intensity, although life expectancy than the metal to badly, but of engineering plastics in automotive applications is also a lot of the above facts, so that reliability to meet the basic requirements, plastic to be processed into a variety of colors, structure, price is the cheapest property, I would like for temporary use, the user does not take into account long-term use is a good choice.
Fourth, the structure of installation:
1, single, multi-layer;
2, a multi-pole;
3, closed at one end, closed at both ends;
4, spacing fixed, movable;
5, screw-type, suction cup, suction cups can be mounted screws;
6, hook type.